|
Câblage home studio—étude de cas |
|
Carte terratec phase 22 et Console behringer UB802 |
|
Solution 1 |
|
Instruments Micros etc… (sources à enregistrer) |
|
Description de la solution : La console ne sert que de préampli pour la carte. Tout le monitoring (y compris le monitoring de ce que l’on est en train d’enregistrer) se fait via cubase et le direct monitoring de la carte. Sur le papier, une solution parfaite à condition que le monitoring de la carte soit sans latence. NB : d’après la doc les sorties main out de la console sont asymétriques alors que les entrées de la carte sont symétriques. Il faudra vérifier ce que dit terratec pour assurer le meilleur cablâge de désymétrisation : The PHASE 22 system has two high-quality analog inputs, which can be independently addressed. The connections have been realized as 1/4" jacks and offer a balanced signal path to minimize interference. Naturally, it is also possible to connect unbalanced mono jacks. The unused signal phase is automatically connected to the analog ground. If the level of a connected device is too low, you can increase the signal by up to 18 dB in 0.5 dB steps with the controllers in the PHASE Control Panel. In the drivers as well as in the PHASE ControlPanel, the inputs are viewed as a stereo pair. As a rule, you can also combine the two channels for mono use in common audio editors.
|
